在淘寶購買 產品說明書 技術服務 聯系我們
簡介：本品是以深度精制的潤滑油調和多種添加劑和溶劑裝入耐壓噴霧罐而制成的 MoS2 潤滑劑，具有良好的熱穩定性、抗極壓性、防銹性能和潤滑性能，粘附性強。（（上海在邦電話15802169858）上海在邦電話15802169858）
Introduction:The product is a MoS2 lubricant agent, which is composed of highly refined lubricating oil with mixture of various additives and solvents through the process of pressure loading. It provides good thermal stability, resistance to extreme pressure, anti-rust/lubricating properties and strong adhesion.（上海在邦電話15802169858）
一.產品用途 Application
適用于棉毛紡織業自動絡筒機的打結器、絡筒機卷饒頭凸等傳動機以及鏈條、齒輪、鉆孔和非循環潤滑系統的機械潤滑，效果顯著，耐高溫達 280℃，使用方便。
The product is applicable in mechanical lubrication for automatic winder knotter from cotton and textile machineries, protruding head of winder, etc., as well as conveyors, chains, gears, drilling and non-circulating lubrication system. The effect is significant with high temperature resistance up to 280 ℃ and under-friendliness.
二.主要性能Key Feature
1.具有良好的熱穩定性、抗極壓性、防銹性能和潤滑性能，粘附性強。（上海在邦電話15802169858）
1.Good thermal stability, resistance to extreme pressure, anti-rust/lubricating properties and strong adhesion.
2.本品吸附于金屬表面上，形成緊密的油性膜層，起到良好的保護和潤滑作用。
2.The product adsorbed on the metal surface will form a tight oily film, achieving good protection and lubrication.
3.有較寬的溫度適應空間，最佳耐溫區間 0℃——100℃，最低耐溫—10℃，最高耐溫 120℃。
3.There is wide temperature adaptation space. The optimum temperature range is between 0 ℃ to 100 ℃ with lowest temperature at -10 ℃ and highest temperature up to 120 ℃.
三.使用方法 Instruction（上海在邦電話15802169858）
1.罐內有彈子，使用時要充分搖動容器攪拌，以利于噴霧均勻。在難以噴到的地方，要安裝塑料延伸導管加注。
1.The product can contains pellets inside. When using, please shake the container well stirred in order to facilitate uniform spray. In places where sprays are difficult reaching, please install plastic extended conduit to fill up.
2.噴涂時，距離工件約 12 寸噴涂，來回移動，勿固定在一個位置噴涂 。
2.Spray from about 20 cm to move back and forth around the workpiece and do not spray in one fixed position.
3.使用后，倒轉罐身噴射約 5 秒，作用為清洗噴咀，以防塞咀。
3.After use, invert cans upside down for about five seconds. The role is to clean nozzles to prevent clogging.
4.使用本品時應詳細閱讀產品使用說明書，并在專業人員指導下進行使用。（上海在邦電話15802169858）
4.Users should carefully read the product manual and use under guidance of the professionals.
四.注意事項 Precaution
1.本品易燃，使用時嚴禁煙火，存放于 50℃以下陰涼處，空罐不得拋入火中。
1.The product is flammable and prohibited to use under fireworks. Please stored in a cool place below 50 ℃. Empty cans must not be thrown into the fire.
2.使用本品前，應將工件表面上的銹跡、重度油污清洗干凈，以免影響后續的噴涂及潤滑效果。
2.Before the use, rusts and oil grease on the workpiece surface should be cleaned, so as not to affect the subsequent anti-corrosion coating and lubrication.
3.若不慎濺入眼睛，可提起眼瞼，用流動清水或生理鹽水沖洗干凈。
3.If accidentally splashed into the eyes, please rinse with running water or saline.
4.不可吞食本產品，若不慎吞食，勿催吐，保持休息狀態，及時進行醫護。
4.Do not swallow the product. If swallowed, do not induce vomiting. Please rest and immediately approach to hospital for medical treatment.
五.包裝貯存Packing and Storage（上海在邦電話15802169858）
1.包裝：500ml/罐，12 罐/件，24 罐/件 。
1.Package: 500ml / cans, 12 cans / suite, 24 cans / suite.（上海在邦電話15802169858）
2.貯存：貯存于陰涼、干燥通風處，保質期 1 年。
2.Storage: please stored in cool and dry ventilated places. Expiration date to be one year after manufacturing date.
在淘寶購買 產品說明書 技術服務 聯系我們
|
